| LAVERDAMANIA |
Bearings:
- Bearings type (1000):
| Crankshaft
- LHS | NJ
307/C3 | 35X80X21mm |
| Crankshaft
- RHS | 6307
NR/C3 | 35X80X21mm |
| Crankshaft
- Central | NF
207/C3 (X2) | 35X72X17mm |
| Crankshaft
- End of LHS | NKI
20/16 | 20X32X16mm |
| Crankshaft
- End of LHS (LHS ignition) | NJ204
/ C3 | |
| Crankshaft
- End of RHS | 16006/C3 |
30X55X9mm |
| Starter wheel |
16007/C3 (or HK 3016 with LHS ignition) |
35X62X9mm |
| Clutch house
cages | HK |
22X28X16mm |
| Main shaft
- End of LHS | NK
22/16 | 22X30X16mm |
| Main
shaft -special bearing | 63/28
NR/C3 | 28X68X18mm |
| Mainshaft
- RHS special bearing | 63/32
NR/C3 | 32X75X20mm |
| Layshaft
- LHS roller bearing | NJ
304/C3 | 20X52X15mm |
| Layshaft
- RHS roller bearing | NJ
303/C3 | 17X47X14mm |
| 1rst
gear shaft (since engine n° 3707) | Type
K | 20X24X17mm |
| Steering
(upper) |
6205 - 2RS (180°), 30205 (RGS, Corsa, SFC 1000) |
25X52X15mm ( 25X52X16,50mm) |
| Steering
(down) | 30205 |
25X52X16,50mm |
| Swinging
arm (since 1976 on light alloy wheels) | HK |
25X32X38mm (X2) |
| Front
wheel | 6004
- 2RS 1 | 20X42X12mm
(X2) |
|
Rear wheel |
6303 - 2RSJ |
17X47X14mm (X2) |
| Sprocket
plate (drum brake) | 6205
- 2RS | 25X52X15mm
(X2) |
|
Sprocket plate (disc brake) |
6004 - 2RS (1rst model) | 20X42X12mm 20X47X14mm |
* Note concerning the wrong bearing batches in 1979:
In
1979, like described in the "1000" chapter of this site, some bikes
had been equipped with a wrong batch of bearings, meaning failures and broken
engines.
Here are the serial
number of these bikes:
1000:
- From the serial number 6204 to 6594
- From the serial number 6598 to 6603
1200:
- From the serial number
1519 to 1566
- From the serial number
1833 to 2533
-
Bearings type (750):
| Crankshaft-RHS |
6307 NR/C 3 |
35X80X21 mm |
| Crankshaft-LHS |
HJ 307/C 3 |
35X80X21 mm |
| Crankshaft
- Central | NF
207/C 3 | 35X72X17
mm (X2) |
| Camshafts
L and RHS | 6204/C
3 | 20X47X14
mm (X4) |
| Crankshaft-LHS
needle bearing |
20X32X16 mm | |
| LHS
clutch needle bearing |
22X30X16 mm | |
| Starter
wheel (needle) |
25X32X20 mm | |
| Main
shaft -special bearing | 63/28
NR/C 3 | 28X68X18
mm |
| Layshaft
- special bearing | 63/32
NR/C 3 | 32X75X20
mm |
|
Layshaft - LHS roller bearing |
NJ 304/C3 |
20X52X15mm |
| Layshaft
- RHS roller bearing | NJ
303/C3 | 17X47X14mm |
| Steering
(upper) | 6205
- 2RS | 25X52X15mm |
| Steering
(down) | 30205/J
2 | 25X52X16,25mm |
| Front
wheel (drum brake) | 6203/2
RS | 17X40X12
mm |
|
Front wheel (disc brake) |
6004 - 2RS 1 |
20X42X12mm (X2) |
| Rear
wheel (Grimeca brake) |
17X40X17,5 mm (X2) | |
| Rear
wheel (Laverda brake) | 6303/2
RS | 17X47X14
mm (X2) |
| Sprocket
plate (Grimeca brake) | 6204/2
RS | 20X47X14
mm (X2) |
| Sprocket
plate (Laverda brake) | 6205/2
RS | 25X52X15
mm (X2) |