NB: These instructions are given for guidance only and cannot engage the author's liability in the event of misinterpretation, failure to assess the vehicle's actual condition and/or non-conformity, unsuitable mechanical practice or the use of inappropriate tools.
Adaptable ignition/key switch. These are adaptable parts.
- Depending on the model, the 4-pin connector must be removed: cut the wires, strip and tin them. Fit 6.35 mm flat female spade terminals, each with a compulsory insulating cap.
- Orange wire → switched + (after ignition).
- Red wire → permanent +.
- Brown (or grey) wire → lighting feed.
Terminal layout (looking at the connector): top, grey and brown; bottom, orange and red.